Topic 1, Fabrikam, Inc
Overview
General Overview
Fabrikam, Inc., is a plastics manufacturer.
Fabrikam has an Exchange Server organization that contains only servers that have
Exchange Server 2013 installed.
Physical Locations
Fabrikam has two main offices. The main offices are located in Tampa and Charlotte. The
company has 8, 000 users in each office.
Existing Environment
Active Directory Environment
Fabrikam has an Active Directory forest that contains one domain named fabrikam.com.
Each office is configured as an Active Directory site.
The network contains four subnets. The subnets are configured as shown in the following
table.
All of the traffic from Subnet1 is routable to Subnet3. All of the traffic from Subnet2 is
routable to Subnet4.
All client computers are on Subnet1 and Subnet3 only. Subnet 192.168.1.0/24 and subnet
192.168.10.0/24 are assigned as the MAPI network.
The network contains four domain controllers. The domain controllers are configured as
shown in the following table.
Microsoft 70-342 : Practice Test
3
http://certkill.com
✑
✑
✑
✑
✑
✑
Network Infrastructure
The network contains the following components:
Two 10-gigabits per second WAN links that connect the Tampa office and the
Charlotte office. The links have a latency of less than 15 ms.
One IP-PBX that is located in the Tampa office. The IP-PBX can use only
unencrypted communications.
An Internet connection in the Tampa office and an Internet connection the
Charlotte office.
Exchange Environment
The network contains six servers that have Exchange Server 2013 installed. The servers
are configured as shown in the following table.
The Exchange Server environment has the following configurations:
Two data loss prevention (DLP) policies named DLP_Finance and DLP_PII.
DLP_Finance is based on a template named Financial Data - U.S. DLP_PII is
based on a template named PII (U.S.).
A mailbox database named UM that hosts only Unified Messaging (UM)-enabled
mailboxes and is replicated between the Mailbox servers in the Tampa office only.
A database availability group (DAG) named DAG1 that contains EX2, EX3, EX5,
Microsoft 70-342 : Practice Test
4
http://certkill.com
✑
✑
✑
✑
✑
✑
✑
✑
✑
✑
✑
✑
✑
✑
✑
and EX6. DAG1 is configured to use DHCP to obtain an IP address.
A Send connector named Tampa SMTP that uses SMTP1 as a smart host. The
cost of the Tampa SMTP connector is 10.
Mailbox servers in the Tampa office that provide outbound SMTP services to the
Internet.
A UM dial plan named UM1.
An SMTP relay device named SMTP2 in the Charlotte office.
An SMTP relay device named SMTP1 in the Tampa office.
No client access services are published to the Internet.
Requirements
Exchange Server Issues
The current Exchange Server environment has the following issues:
Due to power failures, the Exchange servers unexpectedly fail, causing databases
to fail over. During the database failovers, the preferred database is not activated,
causing an unexpected distribution of active databases.
An IRM template named No Print or Screenshot is deployed, but the template fails
to prevent users from taking screenshots of email messages.
Technical Requirements
You identify the following technical requirements:
Assign a static IP address to DAG1.
Block all personally identifiable information (PII) data and financial data without
exception.
Prevent the forwarding of email messages sent by users who have a value of
Legal in their Department field.
Ensure that the members of a group named HR1 can search all of the mailboxes
for sensitive email content.
Use Information Rights Management (IRM) to protect all of the voice mails left for
the telephone number of the human resource (HR) department.
Implement an archiving policy that moves all of the email messages from the
mailbox folders to an Archive mailbox after 30 days and permanently deletes all of
the email messages after 365 days.
You need to ensure that the HR1 group can perform the tasks required to meet the
technical requirements.
To which group should you add HR1?
To answer, select the appropriate group in the answer area.
Question No : 1 HOTSPOT - (Topic 1)
Microsoft 70-342 : Practice Test
5
http://certkill.com
What should you recommend?
A. Create a UM mailbox policy and associate the policy to UM1. Configure the voice mail
protection settings of the UM mailbox policy. Create an auto attendant and link the auto
attendant to UM1.
B. Create a UM mailbox policy and associate the policy to a new dial plan. Configure the
voice mail protection settings of the UM mailbox policy. Create an auto attendant and link
the auto attendant to the new dial plan.
C. Create a UM mailbox policy and associate the policy to a new dial plan. Configure the
voice mail protection settings of the UM mailbox policy. Assign the UM mailbox policy to the
mailbox of the HR department.
D. Create a UM mailbox policy and associate the policy to UM1. Configure the voice mail
protection settings of the UM mailbox policy. Assign the UM1 mailbox policy to the mailbox
of the HR department.
Answer: D
Explanation:
* Scenario:
/ Use Information Rights Management (IRM) to protect all of the voice mails left for the
telephone number of the human resource (HR) department.
/ There is a UM dial plan named UM1.
* The Protected Voice Mail feature is available with Exchange 2010 and later versions of
Unified Messaging (UM). It can be configured on a UM mailbox policy.
* By default, a single UM mailbox policy is created every time you create a UM dial plan.
The new UM mailbox policy is automatically associated with the UM dial plan, and part of
the dial plan name is included in the display name of the UM mailbox policy. You can edit
this default UM mailbox policy. You can create additional UM mailbox policies to apply a
common set of settings for groups of users.
You need to resolve the IRM template issue.
Which user right should you modify?
Question No : 3 HOTSPOT - (Topic 1)
Microsoft 70-342 : Practice Test
7
http://certkill.com
To answer, select the appropriate user right in the answer area.
Answer:
You are evaluating the implementation of the planned static IP addresses for DAG1.
You need to identify the appropriate IP addresses for DAG1.
Which two IP addresses should you identify? (Each correct answer presents part of the
solution. Choose two.)
A. 169.254.0.10
B. 192.168.1.10
C. 192.168.2.10
D. 192.168.10.10
E. 192.168.20.10
F. 224.0.0.10
Answer: B,D
Question No : 4 - (Topic 1)
Microsoft 70-342 : Practice Test
8
http://certkill.com
Explanation:
* Scenario:
/ Assign a static IP address to DAG1.
/ A database availability group (DAG) named DAG1 that contains EX2, EX3, EX5, and
EX6. DAG1 is configured to use DHCP to obtain an IP address.
/ Subnet 192.168.1.0/24 and subnet 192.168.10.0/24 are assigned as the MAPI network.
* A DAG network is a collection of one or more subnets used for either replication traffic or
MAPI traffic. Each DAG contains a maximum of one MAPI network and zero or more
replication networks.
You need to configure transport rules to meet the technical requirements for the PII data
and the financial data.
How should you configure the rules?
To answer, disable the appropriate rule or rules in the answer area.
Question No : 5 HOTSPOT - (Topic 1)
Microsoft 70-342 : Practice Test
9
http://certkill.com
Answer:
You need to recommend an Outlook protection rule solution to meet the technical
requirements.
What should you recommend?
A. Create an Outlook protection rule and filter the rule based on the FromDepartment
property. Apply the Do Not Forward protection template to the rule and enable the
UserCanOverride setting.
B. Create an Outlook protection rule and filter the rule based on the FromDepartment
property. Apply the Do Not Forward protection template to the rule and disable the
UserCanOverride setting.
C. Create an Outlook protection rule and filter the rule based on the SentTo property. Apply
the Do Not Forward protection template to the rule and disable the UserCanOverride
setting.
D. Create an Outlook protection rule and filter the rule based on the SentTo property. Apply
the Do Not Forward protection template to the rule and enable the UserCanOverride
setting.
Answer: B
Explanation:
Question No : 6 - (Topic 1)
Microsoft 70-342 : Practice Test
10
http://certkill.com
